JB-Lighting Licon 1X - Manual (Page 100)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 100 -
Press the softkey EXEC and the loading process is started. During the loading process the message:
READING DATA .... is shown on the display.
When the loading process was successful, the message COMPLETE is shown on the display.
20.4.1 Loading all console data
Activate the backup menu by pressing the softkey BACKUP in the main menu and press the softkey
LOAD. Then press the softkey ALL. The Licon 1X will list all files that are stored in this file group. Use the
middle encoder wheel (SELECT) to select the file to be loaded. Press the softkey EXEC to start the
loading process. When the loading process was successful, the message COMPLETE is shown on the
display.
20.4.2 Loading timeline files
To load a timeline file from a floppy disk or a USB stick, proceed as follows:
Activate the backup menu by pressing the softkey BACKUP in the main menu and press the softkey
LOAD. Then press the softkey TILINE. The Licon 1X will list all files that are stored in this file group. Use
the middle encoder wheel (SELECT) to select the file to be loaded. Press the softkey EXEC to start the
loading process. When the loading process was successful, the message COMPLETE is shown on the
display.
20.4.3 Loading memory files (cues, chases, sequences)
To load a memory file from a floppy disk or a USB stick, proceed as follows:
Activate the backup menu by pressing the softkey BACKUP in the main menu and press the softkey
LOAD. Then press the softkey MEMORY. The Licon 1X will list all files that are stored in this file group.
Use the middle encoder wheel (SELECT) to select the file to be loaded. Press the softkey EXEC to start
the loading process. When the loading process was successful, the message COMPLETE is shown on
the display.
20.4.4 Loading preset files
To load a preset file from a floppy disk or a USB stick, proceed as follows:
Activate the backup menu by pressing the softkey BACKUP in the main menu and press the softkey
LOAD. Then press the softkey PRESET. The Licon 1X offers two possibilities:
ALL will load all files that are stored in this file group. SINGLE will load the preset files of a certain fixture.
Use the middle encoder wheel (SELECT) to select the file to be loaded. Press the softkey EXEC to start
the loading process. When the loading process was successful, the message COMPLETE is shown on
the display.
20.4.5 Loading config files
To load a config file from a floppy disk or a USB stick, proceed as follows:
Activate the backup menu by pressing the softkey BACKUP in the main menu and press the softkey
LOAD. Then press the softkey CONFIG. The Licon 1X will list all files that are stored in this file group.
Use the middle encoder wheel (SELECT) to select the file to be loaded. Press the softkey EXEC to start
the loading process. When the loading process was successful, the message COMPLETE is shown on
the display.
20.4.6 Loading L-user files
To load anL-user file from a floppy disk or a USB stick, proceed as follows:
Activate the backup menu by pressing the softkey BACKUP in the main menu and press the softkey
LOAD. Then press the softkey L-USER. You can choose between ALL and SINGLE. Select one of the
two possibilities and the Licon 1X will list all files that are stored in this file group. Use the middle encoder
wheel (SELECT) to select the file to be loaded. Press the softkey EXEC to start the loading process.
When the loading process was successful, the message COMPLETE is shown on the display.