JB-Lighting Licon 1X - Manual (Page 4)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 4 -
General remarks
The Licon 1X by JB-lighting was designed to facilitate and accelerate the control of intelligent fixtures as
well as conventional DMX dimmer channels.
The Licon 1X is capable of controlling up to 32 fixtures with a maximum of 25 control channels and 7
fixed-value channels.
 In addition, you have access to 96 conventional DMX channels.
 You can control the fixtures by direct selection of the individual fixtures and the corresponding
parameters. The keys on the console are labelled so that even untrained operators will always
find the various functions of the Licon 1X.
 Since sequences and chases can be created with the help of presets in the Licon 1X, simple and
effective programming becomes possible.
 Moreover, the console comes with a chase generator that allows creation of chases on the basis
of presets. In this way, you can realise effectful sequences in a matter of seconds.
 Even during a show, you will have access to individual fixtures or fixture groups and their
parameters as well as to the runtimes of chases.
 The desk can be synchronised by external signal input such as MIDI, SMPTE or may be run
music-animated. It is possible to link several desks in order to multiply the number of control
channels.
 The Licon 1X is equipped with a DMX-In interface for insertion of a DMX desk/console.
 The integrated CD-Rom drive allows you to programme shows with commercially available or
self-recorded CDs. The shows will run music-synchronised and do not require additional devices
such as a timecode clock.
 4 AUX controllers are available in order to control additonal DMX devices such as fog machines.
 Data are stored on USB memory sticks or 3.5“ floppy-disks.
The software of the Licon 1X is upgraded via PC. The latest software version is available for download on
the Service section of our homepage at www.JB-lighting.de.