JB-Lighting Licon 1X - Manual (Page 38)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 38 -
Important: Because of the total number of 32 phase steps, the Licon 1X assumes the presence of a sine
wave. If you employ less than 32 moving heads, you must distribute them over the 32 phase steps.
The Licon 1X activates such patterns on its own when the softkeys WAVE and 2-WAVE are pressed.
WAVE:
distributes the phase shift always in the optimal distance in proportion to the sine wave
depending on the number of moving heads.
2-WAVE: distributes the phase shift of the first half of the selected moving heads in the opitmal distance
to the sine wave, the second half starts with the final value of the first wave and ends with the
start value.
Movements can also be stored as presets. Proceed as described in chapter 4.1.