JB-Lighting Licon 1X - Manual (Page 64)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 64 -
With the softkeys SEQ1-SEQ8 (names may be changed) you
can programme your own fixture sequences.
Select the softkey from SEQ1 to SEQ8 to which you wish to
store the desired fixture sequence. As soon as the softkey is
displayed inverted, the softkey EDIT appears in addition on
the display.
Press the softkey EDIT to enter the menu where fixture
sequences are programmed.
The individual functions have the following significance:
CLEAR: deletes the sequence (caution: without
confirmation prompt)
DEL ST: deletes a step that was previously selected
with the middle encoder wheel (STEP)
NAME: naming the sequence by keys of the Cues /
Chases or Sequences section
INSERT: inserts a step
STORE: stores a step
11.2.3.3 Programming a fixture sequence
1. Select Page 2 of the chase generator and press the softkey EDIT.
2. Activate one of the possible 8 fixture sequences (softkeys SEQ1 – SEQ8).
3. Press the key of the Fixture-/PAR Selection block (keys 1-32), on which the fixture is
stored that shall be activated as first fixture in the sequence (LED must be lit). If you
press several keys of the Fixture-/PAR Selection block simultaneously, you can
include several fixtures in one step.
4. Press the softkey STORE on the display to store the step.
Each newly programmed step is added to the other steps. You can see on the
display, how many steps you have already programmed. The number of steps of
the sequence already programmed is displayed after the designation LENGTH.
STEP on the display indicates the step, which you are currently programming.