JB-Lighting Licon 1X - Manual (Page 11)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 11 -
2. Configuration (CONFIG)
In order to operate the Licon 1X properly, all devices you wish to have access to must be configured in
the setup first. For this reason, a comprehensive library is made available to you, from which you can
copy setups of the most prevalent parameters into the CONFIG menu. Switch the Licon 1X on and press
the softkey CONFIG to enter the configuration menu. The following display is shown:
2.1 L-USER / Configuring a fixture
If you will use fixtures, the data of which are not yet stored in the library, you have to configure your
fixtures first.
Enter the main menu and press the softkey CONFIG and afterwards the softkey L-USER.
The following display is shown:
With the left encoder wheel cou can select up to 20 different L-User fixture parameters.
Now consecutively enter data of the fixtures. Activate the corresponding parameters with the softkeys
arranged to the right and left of the display. When the field is displayed inverted, you can enter data with
the double-assigned keys of the following sections: CUES, CHASES and SEQUENCES.