JB-Lighting Licon 1X - Manual (Page 83)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 83 -
Copying a block (B-COPY):
Define a block (as described above) and use the middle encoder wheel to select the position, before
which you want to insert the block. Press the softkey B-COPY. The command is executed immediately
and does not require confirmation by pressing the Store key in the Combi section. Press the ESC key to
leave the menu.
Deleting a block (B-DEL):
Define a block as described above. Press the softkey B-DEL. The marked block is deleted immediately.
Press the ESC key to leave the menu.
Moving a block (B-MOVE):
Define the desired block as described above.
When a block is moved, this block is not duplicated (see copying a block) but simply appears at another
position of the sequence. The block will always be inserted before the step that you have marked with the
cursor. For this reason, it is not possible to move a step to the immediately pursuant step. You must skip
the first step after the marked block.
This graph will illustrate the individual working steps.
1: Programme a sequence.
2: Define the desired block.
3: Select the step, before which you want to position
the block (possible positions marked with arrows). In
this example, it is step # 8.
4: Press the softkey B-MOVE to confirm the process.
5: The sequence renumbers itself.
 Press the ESC key to leave the menu.
16.2 Linking chases or cues to a sequence step (LINK)
A sequence must contain at least one step in order to be able
to link a chase or a cue to this sequence.
Enter the Edit/Combi-SEQ menu and use the middle encoder
wheel to select the step, to which you wish to assign a chase
or a cue. Press the softkey LINK, the softkey is displayed
inverted. Afterwards select the chase or the cue to be linked
to the sequence step. (This LINK function has nothing to do
with the R-LINK function of a chase or a cue.)
If you have selected, for example, a chase, „LC :1A01 /
Shutter“ appears on the display. This means that the linked
chase is stored on PAGE 1 on BANK D, KEY no. 1 and is
designated Shutter. It is now possible to change the runtimes
independently of the programmed length data. It is also
possible to link the same chase several times and enter
different runtimes each time. If you have linked a chase to a sequence, which was part of a speed group,
this chase will be removed from the speed group.