JB-Lighting Licon 1X - Manual (Page 87)

JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 87 -
The middle master fader (C PAR) is used to scale the values shown on the display.
18.1 Direct access
In order to gain direct access to the edit functions of the PAR section, one of the
three PAR keys in the Feature Selection block must be pressed first.
When one of the PAR keys is pressed, the display shown on the
left appears:
Stored PAR presets can be recalled on this page.
You can select the individual channels with the keys of the
FIXTURE-/PAR-SELECTION and enter the values with the
middle encoder wheel. The channels selected are displayed
inverted.
Caution: The DMX values are entered for all activated channels.
If channels in the range between 33 and 96 are activated (which
cannot be seen on the display all at once), the values of these
channels are also changed.
In practice, however, values are entered in a faster and more
effective manner with the softkeys of the PAR section. Double-
klick one of the PAR keys in the Feature Selection block to enter
the menu shown on the left.