Yaskawa MP900 Teach Pendant - Manual (Page 40)

3.1 Settings and Displays
3 -9
2. Input the rapid transverse speed using the Numeric Keys and press the ENT Key to con-
firm.
Using the Physical Axis
1. Move the cursor to the input area of the physical axis address to be set using the Up and
Down Cursor Keys, as shown in Figure 3.11 and Figure 3.13.
2. Input the rapid transverse speed using the Numeric Keys and press the ENT Key to con-
firm.
Figure 3.11 Set Speed Screen 2
Figure 3.12 Set Speed Screen 3
Figure 3.13 Set Speed Screen 4
3