4 position display – Yaskawa MP900 Teach Pendant User Manual
Page 44
Advertising
3.1 Settings and Displays
3 -13
Figure 3.22 Set Step Screen 4
S
Press the SHIFT + NEXT Key to increase one Module number at a time.
S
Press the
SHIFT + PREV Key to decrease one Module number at a time.
3.1.4 Position Display
J
Position Menu Screen
The Position Menu Screen is shown in the following diagram.
Figure 3.23 Position Menu Screen
J
Program Position
The position of workpiece coordinates controlled by the motion program are displayed on this
screen.
Figure 3.24 Program Position Screen
3
Advertising