6 setting i/o – Yaskawa MP900 Teach Pendant User Manual
Page 51
Advertising
Operation
3.1.6 Setting I/O
3 -20
Figure 3.38 MECHATROLINK Servo I/O Monitor Screen
3.1.6 Setting I/O
J
I/O Menu Screen
The I/O Menu Screen is shown in the following diagram.
Figure 3.39 I/O Menu Screen
J
Setting Input Relays (IN)
The following procedure describes how to set input relays.
1. When the following screen is displayed, the cursor will flash in the third line from the top
on the left-hand side of the screen.
Figure 3.40 Input Relay Screen
3
Advertising