Yaskawa MP900 Teach Pendant User Manual
Page 42
Advertising
3.1 Settings and Displays
3 -11
Figure 3.16 Set Override Screen 3
Figure 3.17 Set Override Screen 4
Set the override to between 0 and 327.
J
Step Amount
This section describes how to set the step amount. There are two methods for setting this infor-
mation, as shown in the following procedures.
Using the Logical Axis
1. Move the cursor to the input area of the logical axis name to be set, using the Up and Down
Cursor Keys.
Figure 3.18 Set Step Screen 1
3
INFO
Advertising