Yaskawa Sigma-5 User Manual: Setup for Rotary Motors - Manual (Page 102)

5.3 JOG Operation Using a Panel Operator
5-5
5
T
rial Operation (Checking Servomotor Operation)
5.3
JOG Operation Using a Panel Operator
This section describes the procedure for executing a JOG operation using a panel
operator.
The panel operator is located under the front cover of the SERVOPACK (analog
pulse models only).
Step Display after operation Keys Operation
1
Turn ON the power to the SERVOPACK.
The forward run prohibited (P-OT) or
reverse run prohibited (N-OT) message is
displayed.
When the JOG operation is executed, P-
OT and N-OT are automatically disabled.
2
Press the MODE/SET Key to select the
utility function mode.
3
Press the Up ( ) or Down ( ) Cursor
Key to select Fn002.
4
Press the DATA/SHIFT Key for approxi-
mately one second.
5
Press the MODE/SET Key.
The servomotor power will turn ON.
View with
front cover open
Panel operator
Alternate
display
MODE/SET DATA/
MODE/SET DATA/
MODE/SET DATA/
MODE/SET DATA/