Yaskawa Sigma-5 User Manual: Setup for Rotary Motors - Manual (Page 88)

3 Wiring and Connection
3.3.4 Wiring the Main Circuit Terminal Connector (Spring Type)
3-30
„ Using a screwdriver
Use a commercially available flat-blade screwdriver with a blade width of 3.0 to 3.5
mm. Insert the screwdriver into the slot and press down firmly to open the wire termi-
nal.
4.
Insert the wire core into the opening, and then secure the wire into
position by removing the opener or screwdriver to close the opening.
5.
Make all the required connections in the same way.
6.
Attach the connector to the SERVOPACK.