TA Triumph-Adler DC 2075 - Manual (Page 14)

Section 2 NAMES OF PARTS
2-2
* Original table
(Set originals to be copied on this table.)
( Original insert guides
(Align these guides to fit the width of the originals to be copied.)
) Document Processor cover
(Open this cover if an original misfeed occurs.)
⁄ Original set indicator
(This indicator lights when originals are set in the Document
Processor.)
¤ Original eject table
(Originals that have been copied are ejected and stored here.)
‹ Document Processor handle
(Hold this handle when you want to open the Document
Processor.)
› Ejection extension
(Open this extension when using larger sized originals such as
8
1/2 " x 14", 11" x 17", B4 and A3.)
fi Total counter
(This counter displays the total number of copies made on the
copier up to this point.)
fl Fixing unit handle
(Operate this handle out if a paper misfeed occurs inside the
copier.)
‡ Transfer unit handle
(Operate this handle out if a paper misfeed occurs inside the
copier.)
— Transfer unit release lever
(Operate this lever when you need to pull out the transfer unit.)
· Transfer unit
(Pull this unit out if a paper misfeed occurs inside the copier.)
‚ Fixing unit
ΠDuplex Unit
(Pull this unit out if a paper misfeed occurs inside the copier.)