TA Triumph-Adler DC 2075 - Manual (Page 159)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-19
Default setting
Paper type
(drawer[cassette] No.1 -
No. 4)
Custom paper type for
2-sided copying
Paper type (for used
paper)
Auto shut-off time
Auto preheat time
Description
Sets and then displays the type of paper that is loaded in
drawers[cassettes] No.1 through No.4.
* The drawer[cassette] No.4 setting will only be
displayed when the optional Side Feeder is installed on
your copier.
Sets whether or not each custom paper type (custom 1 –
custom 8) will be available for use in
2-sided copying.
Sets whether or not used paper will be available for use
with each custom paper type (custom 1 – custom 8).
Sets the amount of time that will elapse after copying, or
if no operation is performed, before the auto shut-off
function engages and turns the copier OFF.
* It is recommended that you try to set a longer time
interval before auto shut-off engages if you use the
copier frequently, and to a shorter time if there are long
intervals between use.
Sets the amount of time between the point that copying
ends and the energy-saving preheat mode engages.
Available
settings
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 –
Custom 8
On / Off
On / Off
15 – 240 (minutes)
1 – 45, 60, 90, 120,
180 and 240
(minutes)
Factory
setting
Plain
On
Off
90 (minutes)
15 (minutes)
Reference
page
7-24
7-25
7-26
7-27
7-28