TA Triumph-Adler DC 2075 - Manual (Page 154)

Section 7 COPIER MANAGEMENT FUNCTIONS
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is “6300” and
for 75 cpm copiers is “7500”. If the entered code matched
the registered one, the “Weekly timer” [“Week timer”] screen
will be displayed.
Inch specifications
Enter the administrator number Close
Metric specifications
Enter the administrator number Close
4 Touch the key that corresponds to the desired weekly timer
setting.
Inch specifications
Weekly timer
Weekly timer
Monday
Tuesday
Wednesday
Thursday
Friday
08:30-ON 19:45-OFF
00:00-ON
03:00-OFF
08:30-ON 19:45-OFF
All day-OFF
Day of the week Up
Down
Change #
Close
Weekly timer
Off
On
Default setting
Setting mode
Metric specifications
Week timer
Week timer
Monday TUESDAY
Tuesday
Wednesday
Thursday
Friday
08:30-ON 19:45-OFF
08:30-ON 19:45-OFF
08:30-ON 19:45-OFF
08:30-ON 19:45-OFF
All day-OFF
Day of the week Up
Down
Change #
Close
Week timer
Off
On
Default setting
Setting mode
NOTES
• It is possible for you to change the 4-digit management code.
(See “Changing the management code” on page 7-34.)
• Refer to the desired procedure(s) explained under “(3) Making
weekly timer settings” and perform the corresponding setting(s).
(3) Making weekly timer settings
Perform the following procedure that corresponds to the desired
setting.
● Programming the weekly timer
Perform this procedure to register the times at which the copier is to
be turned ON and OFF during each day of the week, or whether it will
be left ON or OFF all day on any of those days.
1 Select the day of the week that you want to set the ON and
OFF times for and then touch the “Change #” key.
The setting screen for the selected day will be displayed.
Inch specifications
Weekly timer
Weekly timer
Monday
Tuesday
Wednesday
Thursday
Friday
08:30-ON 19:45-OFF
00:00-ON
03:00-OFF
08:30-ON 19:45-OFF
All day-OFF
Day of the week
Up
Down
Change #
Close
Weekly timer
Off
On
Default setting
Setting mode
Metric specifications
Week timer
Week timer
Monday TUESDAY
Tuesday
Wednesday
Thursday
Friday
08:30-ON 19:45-OFF
08:30-ON 19:45-OFF
08:30-ON 19:45-OFF
08:30-ON 19:45-OFF
All day-OFF
Day of the week
Up
Down
Change #
Close
Week timer
Off
On
Default setting
Setting mode
2 If you want to set the time (hour and minutes) that the copier
will be turned ON and OFF during that day, touch the “Select
work time” key and then adjust the “SW ON” and “SW OFF”
times as desired.
Inch specifications
Monday Back
8:30
Set the timer to turn on main SW on/off in a day.
By selectiong "Cancel", set time is invalided once.
If On/Off mode is set at same time, main SW will turn off.
Default setting - Weekly timer
SW ON 19:45 SW OFF
All day
-OFF
All day
-ON
Select
work time
Close
Cancel
Off
On
Metric specifications
Monday Back
08:30
Set timer to turn main SW on/off for one day.
By selecting "Cancel", set time is invalided once.
If On/Off is set to same time, main SW will turn off.
SW ON 19:45 SW OFF
All day
-OFF
All day
-ON
Select
work time
Close
Cancel
Off
On
Default setting- Week timer
7-15