TA Triumph-Adler DC 2075 - Manual (Page 151)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-13
3 Touch the “On” key or the “Off” key to turn the display of the
“Print Err. PRT.” key ON or OFF, as desired.
Inch specifications
Management menu
Default setting - Management code menu
Print Error report Close
Off
On
Back
Metric specifications
Management mode
Default setting - Management code menu
Print Error report Close
Off
On
Back
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
NOTE
If you turn the display of the “Print Err. PRT.” key ON and then attempt
to print using an incorrect department ID-code, “Department code
mismatch.” will appear and printing will not be possible. In this case,
touch the “Cancel” key. The print job will be canceled and an error
report will be printed out.
Inch specifications
Cancel
Continue
Stopping print Job 8
C o u n t / S e t
1 sided
Plain
O u t p u t
Department code mismatch.
APS
Bypass
Plain
Plain
Color Plain
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Cancel
Continue
Stopping print Job 8
C o u n t / S e t
1-sided
Plain
O u t p u t
Department code mismatch.
Plain
Plain
Colour
APS
Bypass
Plain
(4) Making copies when copy management is turned ON
When copy management is turned ON, it will only be possible to
perform copy operations after using the keypad to enter one of the
registered department ID-codes.
IMPORTANT!
After you have finished copying, BE SURE to press the [Management]
key in order to activate copy management once again. In this case,
the “Enter ID-code” screen will be displayed.
1 Use the keypad to enter your designated department ID-
code and then touch the “Enter” key.
The content of the “Basic” tab will be displayed.
Inch specifications
Enter ID-code.
Enter
Clear
Metric specifications
Enter ID-code.
Enter
Clear
NOTES
• To reenter a mistaken department ID-code, touch the “Clear” key.
• If the entered ID-code does not match a registered one, an error
alarm will sound. In this case, enter a viable department ID-code.