TA Triumph-Adler DC 2075 - Manual (Page 176)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-36
Default setting
Exposure mode
Exposure adjustment
step
Original quality
Custom original size
(setting No.1 – No.4)
Eco print mode ON/OFF
Black-line correction
ON/OFF
Paper selection
Paper type (auto
paper selection mode)
Description
Selects between auto exposure and manual
exposure as the default copy exposure mode in the
initial mode.
Changes the incremental step to be used during
adjustment of the copy exposure.
Determines the default setting that will be used for
the image quality in the initial mode.
Sets the custom paper sizes (settings No.1 through
No.4) that can be used under the original size
selection mode.
Determines whether the Eco print mode will be the
default setting in the initial mode. In this case, the
amount of toner that is used to make the copies will
be reduced, and images will be printed out relatively
lighter than normal.
Turns black-line correction ON. If black lines
appear on copies when you feed originals from
the Document Processor (but they do not exist on
the originals themselves), this function will make
them less apparent.
Sets whether the copier will automatically select the
same size of copy paper as the original once an
original is set (APS: auto paper selection mode), or
whether the drawer[cassette] selected “Default
drawer” [“Default cassette”] setting will be
automatically selected.
Sets which types of paper can be selected under the
auto paper selection mode.
* It is possible to select the type of paper that has
been designated for the drawer[cassette] currently
in use.
Available settings
Manual / Auto
1 step / 0.5 step
Text+Photo / Text /
Photo
Off / On
Inch specification
Width: 2 – 11
5/8
(inches)
Length: 2 – 17 (inches)
Metric specification
Width: 50 – 297 (mm)
Length: 50 – 432 (mm)
On / Off
Off / On
APS / Default
drawer[cassette]
Off / On
Plain
Preprinted
Recycled
Letterhead
Color [Colour]
Prepunched
Rough
Bond
Custom 1 –
Custom 8
Factory
setting
Manual
1 step
Text+Photo
Off
– – –
Off
Off
APS
Off
– – –
Reference
page
7-40
7-41
7-42
7-43
7-44
7-45
7-46
7-47
(4) Copy default settings
The following table indicates the copy default settings available in this copier. Change any or all of the settings as desired in order to make the most
effective use of your copier.