TA Triumph-Adler DC 2075 - Manual (Page 229)

Section 8 OPTIONAL EQUIPMENT
8-9
3 Performing tandem copying
1 Turn the main switch ON to the 2 copiers that are connected
via the interface cable.
2 Make sure that both copiers have completed their warm-up
operation.
3 Touch the “Tandem Copy” key on one of the copiers. That
copier will become the main [master] machine for tandem
copying.
Inch specifications
Combine
AMS
Reduce
/Enlarge
APS
Exposure
Auto
Exposure
Ready to copy. Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort
/Finished
Sort:Off
Sort:On
Basic User choice Program Function
Orig.image
quality
Reduc
/Enlarge
Tandem
Copy
11x8 1 / 2 "
8 1 / 2 x11"
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
APS
Bypass
Plain
Plain
Color Plain
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Merge copy
AMS
Reduce/
Enlarge
APS
Image
quality
Reduce/
Enlarge
Exposure
Auto
Exposure
Ready to copy. Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort/
Finished
Sort:Off
Sort:On
Basic User choice Program Function
Tandem
Copy
APS
Bypass
Plain
Plain
Colour Plain
NOTE
The touch panel display will change as follows once the “Tandem
Copy” key is touched.
<Main [Master]>
Inch specifications
Combine
AMS
Reduce
/Enlarge
APS
Exposure
Auto
Exposure
Ready to Tandem Copy. [Main] Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort
/Finished
Sort:Off
Sort:On
Basic User choice Program Function
Orig.image
quality
Reduc
/Enlarge
Tandem
Copy
11x8 1 / 2 "
8 1 / 2 x11"
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
APS
Bypass
Plain
Plain
Color Plain
11x8 1 / 2 "
11x8 1 / 2 "
11x8 1 / 2 "
Metric specifications
Merge copy
AMS
Reduce/
Enlarge
APS
Image
quality
Reduce/
Enlarge
Exposure
Auto
Exposure
Ready to tandem copy. [Master] Set Paper Size
Bypass
Color
Recycled
Plain Plain
Plain
Sort/
Finished
Sort:Off
Sort:On
Basic User choice Program Function
APS
Bypass
Plain
Plain
Colour Plain
Tandem
Copy
<Sub [Slave]>
Inch specifications
Metric specifications
4 Make the desired copy mode settings, etc., in the [master]
copier.
NOTES
• Tandem copying is not available in the following cases:
. while the sub [slave] copier is in the middle of copying.
. while the main switch of the sub [slave] copier is turned OFF.
. while operation in the sub [slave] copier is stopped because
“Paper misfeed.”, “Call for service.”, or “Add toner to resume
copying” are displayed.
5 Use the [master] copier to set the number of copies to be
made.
NOTES
• Tandem copying should only be used when making at least 3 or
more copy sets.
• If the total number of copy sets to be made is an even number, the
job will be divided equally between the two copiers. If it is an odd
number, the [master] copier will make one more copier than the sub
[slave] copier.
6 Set the originals in the [master] copier.
7 Press the [Start] key on the [master] copier.