TA Triumph-Adler DC 2075 - Manual (Page 189)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-49
● Cover drawer[cassette]
Perform the following procedure to set which drawer[cassette] will be
used to feed the cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
1 Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-39.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management Week
timer
End
Hard Disk
Management
Document
Management Print
report
2 Select “Drawer for cover paper” [“Cassette for cover paper”]
in the settings list on the left side of the touch panel and then
touch the “Change #” key.
The “Drawer for cover paper” [“Cassette for cover paper”]
screen will be displayed.
Inch specifications
Default setting
Copy default
Change #
Default setting
Default drawer
Drawer for cover paper
Default magnification
Auto exposure adj.(Auto)
Manual exp. adj.(Mixed)
1st paper
Bypass
Manual
Standard
Standard
Default menu
Down
Setting mode
Up
Close
Metric specifications
Default setting
Copy default
Default cassette
Cassette for cover paper
Default mode
Auto exposure adj.(Auto)
Manual exp. adj. (Mixed)
1st paper
Bypass
Manual
Standard
Standard
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3 Touch the key that corresponds to the desired
drawer[cassette].
Inch specifications
Drawer for cover paper
S e l e c t d rawe r fo r c ove r p a p e r.
1st paper
2nd paper
3rd paper
D e fa u l t s e t t i n g - C o py d e fa u l t
4th paper
Bypass
Close Back
Metric specifications
Cassette for cover paper Back Close
Select cassette for cover paper.
1st paper
1st paper
2nd paper
3rd paper
Default setting - Copy default
4th paper
Bypass
NOTES
• If you want to quit the displayed setting without changing it, touch
the “Back” key. The touch panel will return to the screen in step 2.
• The drawer[cassette] No.4 setting will only be displayed when the
optional Side Feeder is installed on your copier.
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
6 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.