TA Triumph-Adler DC 2075 - Manual (Page 183)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-43
● Custom original size (setting No.1 – No.4)
Perform the following procedure to set the custom paper sizes
(settings No.1 through No.4) that can be used under the original size
selection mode.
1 Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-39.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management Week
timer
End
Hard Disk
Management
Document
Management Print
report
2 Select one of the “Original size” settings (“custom 1” through
“custom 4”) in the settings list on the left side of the touch
panel and then touch the “Change #” key.
The screen to set the desired original size will be displayed.
Inch specifications
Default setting
Copy default
Default setting
Exposure mode
Exposure steps
Original image quality
Original size (custom1)
Original size (custom2)
Manual
1 step
Text + Photo
11
11 / 16 x16 9 / 16
11 11 / 16 x16 9 / 16
Default menu
Down
Change #
Setting mode
Up
Close
Metric specifications
Default setting
Copy default
Exposure mode
Exposure steps
Image quality original
Original size (custom1)
Original size (custom2)
Manual
1 step
Text + Photo
Off
Off
Default menu Setting mode Up
Down
Change #
Close
Default setting
3 Touch the “+” key or the “-” key under the “Y (Width)” and “X
(Length)” fields to change the displayed width and length,
respectively, to the desired setting.
If you do not want to register a custom original size, touch
the “Off” key.
Inch specifications
Original size (custom1) Close Back
Off
On
Y X 11 11 / 16 16 9 / 16 " "
( 2~11 5 / 8 ) ( 2~17)
Register custom size original.
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Original size (custom1) Back Close
Off
On
100 100 mm mm
(50 ~297) (50~432)
Register custom size original.
Default setting - Copy default
Y X
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
6 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.