TA Triumph-Adler DC 2075 User Manual

Page 83

Advertising

Section 5 OTHER CONVENIENT FUNCTIONS

5-37

17. Feeding paper as a backing sheet for OHP transparencies

[Transparency + backing sheet mode]

When 2 or 3 transparencies are piled on top of one another, static
electricity can cause problems. This mode automatically places a
backing sheet between the transparencies during copying for easy
handling. You can also select whether or not to have the image of the
original copied onto the backing sheet, or even make multiple copies
from the same original.

IMPORTANT!

When copying onto transparencies, ALWAYS use the multi-bypass
tray.

● Copying onto the backing sheet
With this setting, after the original is copied onto the transparency, the
same image will be copied onto the backing sheet as well. (The
asterisk “*” in the illustration indicates the transparencies.)

● Leaving the backing sheet blank
With this setting, the original will be copied onto the transparency but
the backing sheet will be left blank. (The asterisk “*” in the illustration
indicates the transparencies.)

Set the originals to be copied.

Set the transparency film on the multi-bypass tray.

IMPORTANT!

• Fan through the transparencies before setting them.
• Up to 25 transparencies can be set on the multi-bypass tray at

one time.

• Make sure that paper of the same size and orientation as the

transparencies has been loaded into a drawer[cassette].

Touch the “Function” tab and then the “

▼ Down” key.

The content of the next portion of the “Function” tab will be
displayed.

Touch the “OHP backing” [“OHP back”] key. The “OHP
backing” [“OHP back”] screen will be displayed.

Inch specifications

Invert

Mirror

Modify
Copy

Proof Copy

Memo
pages

Orig. set
direction

Ready to copy.

Down

Set

Paper size

Eco Print

Auto
Rotation

Function

Basic

User choice

Program

OHP
backing

11x8

Select of
Output

Metric specifications