TA Triumph-Adler DC 2075 - Manual (Page 178)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-38
Default setting
Erased border width
Copy limit
Repeat copying ON/
OFF
“Job history” screen ON/
OFF
Registration keys ON/
OFF
Customize screen layout
(Main functions)
Customize screen layout
(Add functions)
Description
Determines the default value for the width of the
border to be erased in the two border erase modes.
Sets the limit for the number of copies (or copy sets)
that can be made at a time.
Sets whether or not to prohibit repeat copying, as
well as whether or not to make repeat copying the
default setting in the initial mode. Sets whether to
turn the repeat copy mode ON or OFF.
Sets whether or not to make repeat copying the
default setting in the initial mode.
Sets whether or not the “Job history” screen will be
displayed or not. Also determines the contents of the
displayed information; select “On / reserved” [“On /
Reserv.job”] to have only reserved jobs (copy and
print jobs scheduled during print out of another job)
displayed in that screen.
Sets whether or not to allow a “Register” key to be
displayed in the screen for those function and modes
which can be registered under the registration keys.
Functions and/or modes can only be registered
under registration keys through the “Register” key.
Changes the order of the main functions and modes
that are displayed in the “Basic” and the “User
choice” tabs in order to make the display more
appropriate to the way you use the copier.
* Up to 6 functions and modes can be listed and
displayed.
Adds often-used functions and/or modes, and
changes the order of their layout, in order to make
the display more appropriate to the way you use the
copier.
Available settings
Inch specification
Outside border:
0 – 3/4 (inches)
Center area:
0 – 1
1/2 (inches)
Metric specification
Outside border:
0 – 18 (mm)
Center area:
0 – 36 (mm)
1 – 999
Off / On
Off / On
Off /
On/All job /
On/reserved [On/reserv.
job]
Off / On
Reduce/Enlarge /
Exposure Mode /
Sort/Finish /
1/2 sided /
Quality orig. /
Original size
All functions and modes
other than those in the
“Basic” tab and the
“main functions” in the
“User choice” tab.
Factory
setting
Inch
specification
Outside border:
1/4 (inches)
Center area:
1/4 (inches)
Metric
specification
Outside border:
6 (mm)
Center area:
6 (mm)
999
On
Off
On/All job
On
1 Reduce/
Enlarge
2 Exposure
Mode
3 Sort/Finish
4 1/2 sided
5 Quality orig.
6 Original size
7 Border Erase
[Erase Mode]
8 Cover
9 (None)
10 Proof Copy
[Test copy]
11 (None)
12 Form Overlay
13 (None)
Reference
page
7-59
7-60
7-61
7-62
7-63
7-64
7-65