TA Triumph-Adler DC 2075 - Manual (Page 245)

Section 9 TROUBLESHOOTING
9-15
3 Open the front cover to the copier.
4 Turn the green fixing knob in the direction of the arrow shown
in the illustration. Remove the jammed paper once it is
ejected.
5 Push the green release lever down to the left.
6 Turn the green conveyor knob in the direction of the arrow
shown in the illustration. The paper will be transported to the
paper conveyor unit.
7 Pull the paper conveyor unit out slowly. Remove any jammed
paper.
8 Open the cover to the fixing unit.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is
a danger of electrical shock.
CAUTION
The copier’s fixing unit is extremely hot. Take
sufficient care when working in this area, as there is
a danger of getting burned.