TA Triumph-Adler DC 2075 - Manual (Page 161)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-21
(2) Accessing the machine default settings
Perform the following procedure when you want to access the
screens for each of the various machine default settings.
1 With the content of the “Basic” tab displayed, press the [ ]
key.
The “Default setting” screen will be displayed.
2 Touch the “Machine default” key on the left side of the touch
panel.
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management Print
report
3 Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is “6300” and
for 75 cpm copiers is “7500”.
Inch specifications
Enter the administrator number Close
Metric specifications
Enter the administrator number Close
4 If the entered code matched the registered one, the
“Machine default” screen will be displayed.
Inch specifications
Default setting
Machine default
Auto drawer switching
Paper size(2nd drawer)
Paper size(3rd drawer)
Paper type(1st drawer)
Paper type(2nd drawer)
On / All types of paper
Auto / Inch
Auto / Inch
Plain
Plain
Default menu
Down
Change #
Close
Setting mode
Up
Default setting
Metric specifications
Default setting
Machine default
Auto cassette switching
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper type (1st cassette)
Paper type (2nd cassette)
On / All types of paper
A4
A4
Plain
Plain
Up
Down
Change #
Close
Default setting
Default menu Setting mode
NOTES
• It is possible for you to change the 4-digit management code.
(See “Changing the management code” on page 7-34.)
• Refer to the desired procedure(s) explained under “(3) Making
machine default settings” and perform the corresponding setting(s).