TA Triumph-Adler DC 2075 - Manual (Page 203)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-63
● Registration keys ON/OFF
Perform the following procedure to set whether or not to allow a
“Register” key to be displayed in the screen for those function and
modes which can be registered under the registration keys. Functions
and/or modes can only be registered under registration keys through
the “Register” key.
1 Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-39.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management Print
report
2 Select “Display register key” [“Display "Register" key”] in the
settings list on the left side of the touch panel and then touch
the “Change #” key.
The “Display register key” [“Display "Register" key”] screen
will be displayed.
Inch specifications
Default setting
Copy default
Change #
Default setting
Modify Copy
Job Queue Report
Display register key
Customize(Main function)
Customize(Add function)
On / Off
On(All job)
On
Default menu
Down
Setting mode
Up
Close
Metric specifications
Default setting
Copy default
Modify copy
Job Queue Report
Display"Register"key
Customize(Main function)
Customize(Add function)
On / Off
On(All jobs)
On
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3 If you want the “Register” key to be displayed, touch the “On”
key. If you do NOT want it to be displayed, touch the “Off”
key.
Inch specifications
S e l e c t O n e t o u c h key O n / O f f.
A bl e t o u s e R e g i s t e r key o n e a c h s c r e e n .
Display register key
O n
Off
D e fa u l t s e t t i n g - C o py d e fa u l t
Close Back
Metric specifications
S e l e c t t o s h ow R e g i s t e r key O n / O f f.
A bl e t o u s e R e g i s t e r key t o r e g i s t e r / d e l e t e a t e a c h p a g e.
Back Close Display"Register"key
On
Off
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4 Touch the “Close” key. The touch panel will return to the
screen in step 2.
5 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
6 Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.