TA Triumph-Adler DC 2075 - Manual (Page 150)

Section 7 COPIER MANAGEMENT FUNCTIONS
7-12
● Turning print management ON/OFF (only available when the
optional Printer Kit is installed in your copier)
Perform this procedure to turn print management ON.
1 Display the “Management code menu” screen.
(See “(2) Accessing the copy management mode settings”
on page 7-3.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management Week
timer
End
Hard Disk
Management
Document
Management Print
report
2 Touch the “On” key or the “Off” key under “Printer” screen to
turn print management ON or OFF, as desired.
Inch specifications
Counter
by ID-code Print
the list
Management menu
Default setting
Management code menu
# of copy
clear
Counter
correct
ID-code
Reg./Del.
P r i n t e r c o py
Off
On
Close
Off
On Print
Err. PRT.
Metric specifications
Counter
by ID-code Print
the list
Management mode
Default setting
Management code menu
clear
counter
ID-code
Reg./Del. P r i n t e r C o py
Off
On
Close
# of copy
correct
Off
On Print
Err. PRT.
3 Touch the “Close” key. The touch panel will return to the
screen in step 2.
4 Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
● Turning error report access ON/OFF (only available when the
optional Printer Kit is installed in your copier)
Perform this procedure to turn the display of the “Print Err. PRT.” key -
which allows you to print out an error report whenever printing is
attempted with an unregistered department ID-code - ON or OFF.
1 Display the “Management code menu” screen.
(See “(2) Accessing the copy management mode settings”
on page 7-3.)
Inch specifications
Default setting
Default setting
Copy
default Weekly
timer
Machine
default
Language Management
End
BOX
Management Bypass
setting
Document
Management Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management Print
report
2 Make sure that the “On” key is selected under “Printer”, and
then touch the “Print Err. PRT.” key. The “Print error report”
screen will be displayed.
Inch specifications
Counter
by ID-code Print
the list
Management menu
Default setting
Management code menu
# of copy
clear
Counter
correct
ID-code
Reg./Del.
P r i n t e r c o py
Off
On
Close
Off
On Print
Err. PRT.
Metric specifications
Counter
by ID-code Print
the list
Management mode
Default setting
Management code menu
clear
counter
ID-code
Reg./Del.
P r i n t e r C o py
Off
On
Close
# of copy
correct
Off
On Print
Err. PRT.