TA Triumph-Adler P-4030i MFP - Manual (Page 195)

5-37
Operation on the Machine > Sending
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same
way.
1 Display the screen.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application and display the TWAIN dialog box.
2 Configure the scan settings.
Select scanning settings in the TWAIN dialog box that opens.
The settings that appear in the TWAIN dialog box are as follows.
NOTE
For selecting the machine, see the Operation Guide or Help for each application
software.
Item Detail
Basic Original Size This setting sets the size of the scan area. The available sizes
vary based on the scanner model and the size of the original.
Feed Method This setting specifies the feed method of the original. Select the
feed method from the list.
Original
Orientation This setting specifies the orientation of the original.
Sending Size This setting specifies the image size. The available sizes vary
based on the scanner model and the scan area selected in the
preview panel.