TA Triumph-Adler P-4030i MFP - Manual (Page 60)

2-16
Installing and Setting up the Machine > Energy Saver function
Sleep Level (Energy Saver and Quick Recovery) (models except for Europe)
For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The
default setting is Energy Saver mode.
Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be
set separately for each function. The time required for the machine to wake up from power save mode and resume
normal operation will be longer than for Quick Recovery mode. The ID card cannot be recognized.
Quick Recovery mode recovers from sleep mode quicker than Energy Saver mode. To resume, press the [ Energy
Saver ] key on the operation panel. If print data is received during Sleep, the machine automatically wakes up and starts
printing.
For more information on Sleep Level settings, refer to Quick Setup Wizard on page 2-17 .
NOTE
If the optional Network Interface Kit is installed, Energy Saver cannot be specified.