TA Triumph-Adler P-4030i MFP User Manual
Page 384
11-3
Appendix > Optional Equipment
(1) PF-320 "Paper Feeder (500-sheet x1)"
Up to four additional cassettes identical to the machine's cassettes can be installed in the machine. Paper capacity and
loading method are the same as the standard cassettes. Refer to
Loading in the Cassettes on page 3-14
for loading
paper.
(2) PT-320 "Rear Tray" (P-5035i MFP/P-6035i MFP only)
Use the faceup output tray when you wish paper to be stacked with the printed side facing up (reverse order). The rear
tray can only be used for printing from a PC.
Installing the Rear Tray
1
Install the paper stopper according to the size of paper to be used.
2
Install the rear tray on the rear of the machine.
(3) Card Authentication Kit(B) "Card Authentication Kit"
User login administration can be performed using ID cards. To do so, it is necessary to register ID card information on
the previously registered local user list. For more information about how to register this information, refer to the Card
Authentication Kit(B) Operation Guide.