TA Triumph-Adler P-4030i MFP - Manual (Page 364)

10-16
Troubleshooting > Troubleshooting
C
E
Message Checkpoints Corrective Actions
Reference
Page
Cannot connect to
Authentication Server.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to Auto Error Clear on page 8-39 .
— Set machine time to match the
server's time. page 2-11
— Check the domain name. page 9-2
— Check the domain name. page 9-2
— Check the connection status with
the server. —
Cannot connect to
Server. — Check the connection status with
the server. —
Cannot duplex print on
the following paper.
*1
Did you select a paper size/type
that cannot be duplex printed? Press [Paper Selection] to select
the available paper. Press
[Continue] to print without using
Duplex function. page 6-18
Cannot print the
specified number of
copies.
*1
— Only one copy is available. Press
[Continue] to continue printing.
Press [Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Uncheck [RAM Disk] in the
[Device Settings] tab of the
printer's properties.
NOTE
If you unchecked the [RAM Disk],
check the [RAM Disk] again after
the printing is completed. If not,
print speed may be reduced.
—
Cannot process this
job.
*1
― This job is canceled because it is
restricted by User Authorization or
Job Accounting. Press [End]. ―
Cassette is not installed. ― Cannot feed paper. Set the cassette
indicated on the screen. ―
Check the envelope
switch. Does the envelope lever setting
match the paper type? Match the paper type and the
envelope lever position. page 3-20
Check the document
processor. Is the document processor open? Close the document processor. ―
Check the toner
container. — The toner container is not installed
correctly. Set it correctly. page 10-5
Message Checkpoints Corrective Actions
Reference
Page
Error occurred at
cassette #. ― Remove the indicated cassette.
Press [Next >] to follow the
instructions. ―