TA Triumph-Adler P-4030i MFP - Manual (Page 296)

8-39
Setup and Registration (System Menu) > System Menu
Item Description
Power Off Rule Select whether or not the machine enters Power Off mode for the following function. Select
[On] to set the Power Off mode.
•
Network
• FAX *1
• USB Cable
• USB Host
• RAM Disk
• NIC *2
• Remote Diagnostics
• Application
Value : Off, On
NOTE
Even when any of the functions is set to [On], if either [FAX] or [NIC] is set to [Off], the machine
does not enter Power Off Mode.
When [RAM Disk] is set to [On], even if the data is in the RAM disk, the machine enters Power
Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with
the other devices, the machine will enter Power Off Mode.
*1 Only on products with the fax function installed.
*2 Displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Power Off Timer Select whether to turn off the power automatically after a period of inactivity.
Value : 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses.
Value : Off, On
Error Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
Unusable Time *1 For details, refer to the FAX Operation Guide.