TA Triumph-Adler P-4030i MFP - Manual (Page 367)

10-19
Troubleshooting > Troubleshooting
P
R
Message Checkpoints Corrective Actions
Reference
Page
Paper jam. ― If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instruction to remove the
jammed paper. page 10-26
Performing Drum
Refresh... — The machine is under the
adjustment to maintain its quality.
Please wait. —
Print overrun. — Warning. Low printer memory. The
job was paused. Re-starting the job.
Press [Continue]. —
Message Checkpoints Corrective Actions
Reference
Page
RAM disk error. ― An error has occurred on the RAM
disk. Job is canceled. Press [End].
The possible error codes and their
descriptions are as follows.
04: Insufficient space on the RAM
disk. If the optional RAM dis is
installed, increase the RAM disk
size by changing RAM Disk Setting
in System Menu.
NOTE
The range of RAM disk size can be
increased by selecting [Printer
Priority] in Optional Memory.
―
Removable memory
error. Is writing to a removable memory
prohibited? An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to. ―
― An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, the removable memory
is not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory. ―