TA Triumph-Adler P-4030i MFP - Manual (Page 288)

8-31
Setup and Registration (System Menu) > System Menu
IPSec
Secure Protocol
LAN Interface
Restart Network
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
IPSec Make this setting when you use IPSec. *1
Value : Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
Item Description
SSL Select whether or not to use SSL.
Value : Off, On
IPP Security Select the IPP security level. This setup is available when SSL is [On].
Value : IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].
Value : HTTP/HTTPS, HTTPS Only
LDAP Security (Ext. Address
Book) Select the type of encryption according to the type of security employed by the LDAP server.
This setup is available when SSL is [On].
*1
Value : Off, SSL/TLS, STARTTLS
*1 LDAP must be set to [On] in Protocol Detail on page 8-29 .
LDAP Security (User Property)
SMTP Security Select the communication protocol according to the type of security employed by the SMTP
server. This setup is available when SSL is [On].
Value : Off, SSL/TLS, STARTTLS
POP3 Security (User 1) Select the communication protocol according to the type of security employed by the POP3
server. This setup is available when POP3 is [On].
Value : Off, SSL/TLS, STARTTLS
POP3 Security (User 2)
POP3 Security (User 3)
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value : Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Restart Network Restarts the network.