TA Triumph-Adler P-4030i MFP - Manual (Page 50)

2-6
Installing and Setting up the Machine > Connecting Cables
Connecting Cables
Connecting LAN Cable
1 Connect the cable to the machine.
1 Connect the LAN cable to the network interface connector.
2 Connect the other end of the cable to the hub.
2 Set up the machine.
Power on the machine and configure the network.
IMPORTANT
If the power is on, turn the power switch off.
Power Off (page 2-8)
For details, refer to Network Setup (LAN Cable Connection) on page 2-13 .