PLANET HDVR-1600 User Manual
Page 12
Advertising
Type in cmd and click OK.
Type in ipconfig to get the IP Address of the local computer. Write down the IP address on a piece of
paper for later use.
After the IP address is found, setup the connected DVR(s).
First, go to <Main Menu> Æ <System Setup> Æ <Date/Time> Æ <Time Zone> to setup time zone. To
find out the local time zone, please visit
www.greenwichmeantime.com
NOTE
: The <Time Zone> must be set or the <Network Time Protocol Setup> will not be
accessible.
-
12
-
Advertising