PLANET HDVR-1600 - Manual (Page 16)

4
Chapter 4
Start the HCMS
There are 3 ways to start the HCMS. Note that method A and B are only available if the “Start Menu
Shortcuts” component is installed. Please see section Software Installation for more information.
Method A: Click Start menu and select Programs; find “HCMS” from the listed programs.
Method B: Double click on the shortcut icon on the desktop.
Method C: Go to “\CMS\EXE\” and double click on the HCMS icon.
4.1 Starting Up
If the HCMS is started for the first time, select a desired language for the interface. The available
languages are listed in the scroll box. Click <OK> to confirm the selection.
If the system memory or CPU frequency is less than the requirement, the error message shown as
below will be displayed.
The following message will be shown if the setting file is blank or broken.
- 16 -