ProSoft Technology 5201-MNET-101S - Manual (Page 11)

IEC-101 Slave ♦ ProLinx Communication Gateway Start Here
IEC 60870-5-101 v3 Slave (Firmware version 3.xx) Protocol Manual
ProSoft Technology, Inc. Page 11 of 159
August 6, 2010
1 Start Here
In This Chapter
 What's New ........................................................................................... 11
 ProLinx Reference Guide ...................................................................... 11
 Installing ProSoft Configuration Builder Software .................................. 12
 Using ProSoft Configuration Builder ...................................................... 13
For most applications, the installation and configuration steps described in this
section will work without additional programming. ProSoft Technology strongly
recommends that you complete the steps in this chapter before developing a
custom application.
1.1 What's New
This new and enhanced version 3 of ProSoft Technology's IEC 60870-5-101
Slave implementation includes several new features not found on previous
versions. Version 3 now supports 32-bit bitstring data types. Version 3 also
supports more Causes of Transmission than previous versions. For additional
details, please see the Interoperability Statement (page 129).
1.2 ProLinx Reference Guide
The ProLinx Reference Guide on the ProSoft Solutions CD-ROM provides
detailed information on the entire range of ProLinx gateways. If you have any
questions that are not answered in the 101S Protocol Manual, please refer to the
ProLinx Reference Guide.