ProSoft Technology 5201-MNET-101S - Manual (Page 125)

IEC-101 Slave ♦ ProLinx Communication Gateway Reference
IEC 60870-5-101 v3 Slave (Firmware version 3.xx) Protocol Manual
ProSoft Technology, Inc. Page 125 of 159
August 6, 2010
Set Time Command Block
This functionality allows a remote node to set the clock of the ProLinx gateway.
Request Block
The following table describes the structure of the Set Time command block.
Start Word End Word Description
0 0 200 or 201 = Set Time (Block ID1)
1 1 Block ID2 (Command Request With Response)
2 2 Year
3 3 Month
4 4 Day
5 5 Hour
6 6 Minutes
7 7 Seconds & milliseconds
8 98 Reserved for future use
99 99 200 or 201 = Set Time (Block ID1)