Scan events – ProSoft Technology 5201-MNET-101S User Manual
Page 34
Advertising
101S Protocol Configuration
IEC-101 Slave ♦ ProLinx Communication Gateway
Protocol Manual
IEC 60870-5-101 v3 Slave (Firmware version 3.xx)
Page 34 of 159
ProSoft Technology, Inc.
August 6, 2010
2.1.25 Scan Events
[0] = N
O
S
CANNING
or
[1] = S
CAN FOR
E
VENTS
Separate parameters exist for each monitored point type and define whether or
not events of that particular point type will be generated by the gateway. If the
Scan Events parameter is set to zero
[0] or
N
O
S
CANNING
, then events will not be
generated. If this parameter is set to
[1] or S
CAN FOR
E
VENTS
, events will be
scanned and generated on data change.
Advertising
This manual is related to the following products: