QSC Audio TouchMix-30 Pro 32-Channel Compact Digital Mixer with Touchscreen - Manual (Page 32)

23 1001108-01-F
8. Follow the directions and adjust the
-13.5 dB
Noise
Level
so that the RTA displays a moderate level of activity.
9. Touch Measure . The mixer produces the test signal and captures the measurement data.
NOTE: Each output of a TouchMix mixer actually has two graphic equalizers. One is used by the Tuning Wizard to apply corrections
based on the measurement data. Settings for this equalizer are indicated by the outlined or “ghost” fader caps on the GEQ screen. The
other equalizer may be adjusted by the user.
10. Select a target tuning.
» Select
Flat
– The wizard flattens the system response using the Tuning EQ and sets the user EQ to flat. You
can adjust to taste from there.
» Select
Live
– The wizard flattens the system response and applies a User EQ setting that works well for live
sound reinforcement systems.
» Select
Keep Existing
– The wizard flattens the system response using the Tuning EQ but leaves the user EQ settings
untouched.
11. Touch Restart if the measurement is interrupted by, for example, unexpected, loud ambient noise. Perform the
measurement again.
12. Touch Finish to continue.
13. Touch Navigate To GEQ to view the GEQ settings.