Input channel − setup, Nnput channel − setup – QSC Audio TouchMix-30 Pro 32-Channel Compact Digital Mixer with Touchscreen User Manual
Page 59
50
1001108-01-F
Input Channel − Setup
Channel Setup is provided for all input channels. Line
input channels do not have Phantom power controls.
1.
Setup
– Selects the Setup screen
2.
Name
– Displays the name of the channel.
Touch to display a keyboard and rename the
channel.
3.
Link
– Links adjacent channels. The odd
numbered channel settings are copied to
the even numbered channel. Pan settings
are mirrored. Only odd > even pairings are
supported – even > odd pairings are not.
4.
Reset
– Resets the controls for this channel
to factory defaults.
5.
Playback and Recording
When one of these buttons is engaged, the other is not
displayed. The example above is for illustration only.
•
Digital Input
– (TouchMix-30 Pro only)
Selects the channel’s analog or digital input as
the signal source. The digital source may be
from a USB recording session or from a DAW
(see Rec/Playback for more information). Green
= digital, gray = analog.
•
Recording
(Arm) – When engaged, the
audio on this channel will be recorded on the
USB Drive. Available only when the External Recording & Playback Mode is set to Multitrack USB Drive.
6.
Polarity
– Touch to change polarity of the channel output.
7.
Mic Phantom
– Turns 48V phantom power on/off for the channel (microphone inputs only).
8.
Patch Matrix Channel –
(TouchMix-30 Pro only) Displays the current setting for this channel in the Patch Matrix. If another
channel has been patched to this channel, the field would display the patched channel’s number.
9.
Delay
– Delays the input signal from 0.00 to 100 milliseconds. Touch the In button to activate the delay.
10.
Channel Safe During Scene Recall –
Setting this switch to Safe, protects the channel controls from being changed when
a Scene is recalled.
11.
Digital Gain
– Applies +/- 15 dB of digital gain to the channel signal independently of the channel’s analog gain trim. The setting of
this control is stored and recalled with a scene or preset. When Track is selected as the source, the control applies to the digital input.
12.
Main L/R
– Assigns the channel’s output to the Main Left / Right mix. The factory default is on – assigned to Main L/R.
13.
Sub Groups
– (1 through 8 – TouchMix-30 Pro only) – Assigns the output of the channel to one or more of the eight Sub Groups.
User-assigned names display on the buttons. See the Sub Groups topic.
14.
DCA Group
(1 through 8) – Assigns the channel to DCA Groups. User-assigned DCA Group names display on the buttons. See the
DCA Groups topic.
15.
Mute Groups
(1 through 8) – Assigns the channel to Mute Groups. User-assigned Mute Group names display on the buttons. See
the Mute Groups topic.
Home
Touch an
Input Bank
Touch a
Channel
Touch the
Setup
Tab
∞
Inputs 1-8
Cue
L
C
R
Mic
1
10
5
u
5
10
20
0
40
10
Main
L/R
10
5
u
5
10
20
0
40
10
Mute
Overview
Comp
Gate
Auxes
Presets
EQ
Delay
Digital Gain
Digital Input
Recording
Mic Phantom
Sub 1
Sub 8
Sub 7
Sub 6
Sub 5
Sub 4
Sub 3
Sub 2
DCA 1
DCA 8
DCA 7
DCA 6
DCA 5
DCA 4
DCA 3
DCA 2
Mute 1
Mute 8
Mute 7
Mute 6
Mute 5
Mute 4
Mute 3
Mute 2
Assignments
Polarity
Normal
Reverse
FX
Banjo
Units
Prev
Next
LR
1
2
3
4
5
6
7
8
Default
Banjo
Main
Cue
Main Mix
L/R
Scene:
Joe’s Ears
Aux 1
Aux 2
Aux 2
Aux 3
Aux 3
Aux 4
Aux 4
Aux 5
Aux 5
Aux 6
Aux 6
Aux 7
Aux 7
Aux 8
Aux 8
Aux 9
Aux 9
Aux 10
Aux 10
Aux 11
Aux 11
Aux 12
Aux 12
Aux 13
Aux 13
Aux 14
Aux 14
0.00
1.00 dB
48V
Track
Arm
In
In
Main L/R
Yellow
Sub 8
Sub 7
Sub 6
Sub 5
Sub 4
Sub 3
Sub 2
DCA 1
DCA 8
DCA 7
DCA 6
DCA 5
DRUMS
DCA 3
DCA 2
Band
Mute 8
Mute 7
Mute 6
Mute 5
Mute 4
Mute 3
Mute 2
Setup
Mute
Link
Reset
In 1
Setup
Inputs 1-8
0.00
0.00
ms
feet
meters
In 1
Patch Matrix Channel
L
G
48
L
F
2
4
1
7
9
5
6
8
3
11
10
12
13
14
15
2
Channel Safe
During Scene Recall
Recallable
Safe