Fujitsu Ricoh Fujitsu SP-1425 Image Scanner - Manual (Page 19)

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
19
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains how to power on/off the scanner.
How to Turn the Power ON
1
Press the [Power] button on the operator panel.
 The scanner is turned on, and the [Power] button flashes during
the initialization.
The scanner is ready to scan when the [Power] button lights in
green. This status is referred to as "ready status".
How to Turn the Power OFF
1
Press and hold down the [Power] button on the operator
panel.
 The scanner is turned off, and the [Power] button switches off.
1.3 Turning the Power ON/OFF
HINT
In ready status, the LED indicator is off and the [Power] button is lit.
Check
Scan/Stop
Power
[Power] Button
LED Indicator