Fujitsu Ricoh Fujitsu SP-1425 Image Scanner - Manual (Page 42)

How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Chapter 3 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
42
How to Load
Documents
Scanner
Overview
Indications for the LED Indicator and the [Power]
Button
LED
Indicator
[Power]
Button
Description
Off Flashing This combination indicates that the
initialization is in process after the scanner is
turned on.
This combination stays as it is from the time
that the scanner resumes from power saving
mode or the ADF is closed up until the time
that the scanner enters ready status.
Off Lit The scanner is in ready status.
Indicates that the initialization was
successfully completed after the scanner is
turned on.
This combination also occurs when the
scanner is in power saving mode.
Lit Lit Indicates that a temporary error occurred
during scanning.
For more details about the errors, refer to
"Temporary Errors" (page 69) .
Flashing Lit
or
Flashing
Indicates that a device error (alarm) occurred
during initialization or scanning.
For more details about the errors, refer to
"Device Errors" (page 70) .