Quality of scanned text or lines is unsatisfactory, Appendix, Glossary introduction index contents top – Fujitsu Ricoh Fujitsu SP-1425 Image Scanner User Manual
Page 75
Chapter 7 Troubleshooting
75
Quality of scanned text or lines is unsatisfactory.
*1: When you scan in grayscale or in color mode, the scanned image may not become sharp and clear.
ADF:
Are the glass sections and rollers inside the ADF clean?
Flatbed:
Are the document pad and document bed clean?
No
Clean the parts that are not clean.
For details, refer to
"Chapter 5 Daily Care" (page 50)
.
Yes
Is the resolution appropriate?
No
Specify a higher resolution in the scanner driver.
Yes
Did you configure the settings in the scanner driver to scan
in grayscale or color mode?
Yes
Configure the settings in the scanner driver to scan in black & white mode. (*1)
No
Is there any foreign matter (such as dust or paper dust) on
the document?
Yes
Remove any foreign matter off the document.
Foreign matter may get on the glass sections inside the ADF or the document bed
of the flatbed, and may cause the image to become dirty.
No
If the problem persists, check the items in
"7.4 Before You Contact the Scanner
first, then contact the distributor/dealer where you
purchased this product.