Fujitsu Ricoh Fujitsu SP-1425 Image Scanner - Manual (Page 58)

How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Daily Care
Operational
Settings
Chapter 5 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
58
How to Load
Documents
Scanner
Overview
5
Close the ADF.
For details, refer to "1.4 Opening/Closing the ADF" (page 20) .
6
Plug the power cable, and turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page 19) .
Cleaning the Flatbed
The flatbed can be cleaned with a piece of cloth moistened
with Cleaner F1, or a sheet of Cleaning Wipe.
1
Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover" (page
21) .
2
Clean the document pad and the document bed with a
cloth moistened with Cleaner F1 or a sheet of Cleaning
Wipe.
Be careful not to get your fingers caught
when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, the document
may not be fed into the ADF.
ATTENTION
Be careful not to let the cleaner in between the document bed and
the plastic frame.
Plastic Frame
Document Bed
Document Pad