Fujitsu Ricoh Fujitsu SP-1425 Image Scanner - Manual (Page 99)

Chapter 8 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
99
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Item Description Parameter/Value Factory Default
Count
(page 102)
Check the counters to determine when to replace
the consumables.
Also use it to reset the counter when you have
replaced the consumables. Total Count (ADF)/Total Count (FB)/Pad/Pick Roller 0
Power saving
(page 106)
Specify the waiting time before the scanner
enters power saving mode. Range: 5 to 115 min. (in increments of 5) 15 minutes
Power off after a certain period of time: Select to
set the scanner to turn the power off
automatically if the scanner is left on for a certain
period of time without being used.
Specify the timeout period for the scanner to be
automatically turned off. [Power off after a certain period of time] check box Selected
1 Hour/2 Hours/4 Hours/8 Hours
(When the [Power off after a certain period of time] check box
is selected) 4 Hours