Images are distorted or not clear, Appendix, Glossary introduction index contents top – Fujitsu Ricoh Fujitsu SP-1425 Image Scanner User Manual
Page 76
Chapter 7 Troubleshooting
76
Images are distorted or not clear.
ADF:
Are the glass sections and rollers inside the ADF clean?
Flatbed:
Are the document pad and document bed clean?
No
Clean the parts that are not clean.
For details, refer to
"Chapter 5 Daily Care" (page 50)
.
Yes
Is the ADF being pushed down during scanning? Or is
there a heavy object on top of the ADF?
Yes
Do not push down the top of the ADF, or place any heavy objects on the ADF
during scanning.
No
Is a scan performed on a place that is unstable or
vibrates?
Yes
Perform a scan on a place that is stable and does not vibrate.
No
Is the scanner placed on a flat, level surface? Are the
rubber pads attached on the bottom of the scanner?
No
Either place the scanner on a flat and level surface, or attach the rubber pads on
the bottom of the scanner.
Yes
Are there any wrinkles or curls on the document?
Yes
Smooth out the wrinkles or curls on the document.
No
If the problem persists, check the items in
"7.4 Before You Contact the Scanner
first, then contact the distributor/dealer where you
purchased this product.