2 cleaning the outside, Cleaning the outside – Fujitsu Ricoh Fujitsu SP-1425 Image Scanner User Manual

Page 53

Advertising
background image

How to Use the
Operator Panel

Various Ways to
Scan

Troubleshooting

Replacing the
Consumables

Daily Care

Operational
Settings

Chapter 5 Daily Care

Appendix

Glossary

Introduction

Index

Contents

TOP

53

How to Load
Documents

Scanner
Overview

The outside of the scanner, including the ADF paper chute
(feeder) and the stacker, should be cleaned with either a piece
of dry cloth, a cloth moistened with Cleaner F1/mild detergent,
or a sheet of Cleaning Wipe.

5.2 Cleaning the Outside

ATTENTION

To avoid deformation and discoloration, never use paint thinner or
any other organic solvents.

Be careful not to let any moisture or water inside the scanner during
cleaning.

It may take a long time to dry if an excessive amount of Cleaner F1/
mild detergent is used. Use it in small quantity. Wipe off the cleaner
completely to leave no residue on the cleaned parts.

Thinner

Cleaner F1
or Mild Detergent

Cloth

Cleaning Wipe

Advertising