Fujitsu Ricoh Fujitsu SP-1425 Image Scanner - Manual (Page 47)

Chapter 4 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
47
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
How to Use the
Operator Panel
Scanning a Large Document on the Flatbed
1
Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover" (page
21) .
2
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
3
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
4
Scan the documents with the image scanning application.
For details, refer to the image scanning application manual.
5
Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover" (page
21) .
Reference Point
Do not look directly into the light source.
ATTENTION
Do not move the document during a scan.